Troubleshooting a Hot Water System Emergency: What to Do If It Stops Working
Troubleshooting a Hot Water System Emergency: What to Do If It Stops Working
Blog Article
What are your thoughts and feelings about Hot Water Heater Repair?
Numerous modern-day homes take advantage of an electric water heater for their heating system, because of its comfort and also ease of use. However, much like any other electric devices, problems may occur with its usage, suddenly. It can be actually irritating to awaken to a cool shower as opposed to a hot one or having your bathroom with water that isn't warm enough or even too hot. Whatever the case may be, water heater problems can be fairly nerve-racking. Thankfully, we have actually made a checklist of possible solutions to your water heater issues. There are a number of elements that could cause much of these issues, it could be a concern with the power supply, the electrical burner, or the thermostat. Prior to doing anything, guarantee you shut off the main power supply for safety and security. Whatever the problem is, getting it repaired must not pose excessive of a concern if you follow these actions:
Examine Your Power Supply:
As basic as this may appear, it is really necessary. Without appropriate power, your hot water heater will certainly not function. So the first thing to do when your water instantly retires is to validate that it isn't a power trouble. Check if the fuse is burnt out or the circuit breaker stumbled. If the circuit breaker is the problem, just transform it off and on once again. Change any type of damaged or worn-out fuse. Evaluate the appliance with power after these changes to see if it's currently working.
Inspect the Burner in the Water Heater:
If it's not a power trouble, then try checking out your heating element if it is still working. Check each of your burner to make sure the issue isn't with any of them. If any of them is damaged, change that part and then inspect whether the hot water is back on.
Inspect Your Thermostat:
If your hot water heater still isn't working or the water appearing isn't hot enough, you might need to examine the temperature level settings on your top thermostat. Guarantee the breaker is turned off before doing anything. Open the accessibility panel and also press the red button for temperature level reset over the thermostat. This ought to assist warm the water. Transform the breaker back on and check if the problem has been settled.
Call A Specialist:
If after replacing all defective parts as well as resetting your temperature, the water heater still isn't working, you may require to contact a specialist plumber for a professional point of view. The trouble with your heating system could be that the hot and cold taps have been changed or it may be undersized for the quantity of warm water required in your house. Whatever the instance may be, an expert plumber would certainly assist resolve the issue.
Final thought
Water heater issues are not constantly significant. Most of them result from small problems like a blown fuse or worn-out burner. Replacing the faulty components should work. However, if you are still not able to solve the issue, give a call to your local plumber ahead to get it dealt with.
Common Reasons Why Your Hot Water Heater Isn’t Working
Water Gets Too Hot
Ouch! You wanted a hot shower, not boiling! If you have a newer model electric water heater, your water heater works with a thermostat (actually, two thermostats). If this thermostat has been jostled — or purposely reset — by someone in your home, the water flow will be much hotter than you expected.
FIX: Adjust the thermostat to a more moderate setting for producing hot water. Forty-nine degrees Celsius is recommended to prevent scalding.
Water Doesn’t Get Hot
This is the opposite of the previous problem, but it’s almost as bad. Your flow of hot water is merely lukewarm or even incoming cold water. Once again, an incorrect thermostat setting, or a faulty thermocouple in a gas water heater, could be to blame. Another explanation might be that there’s no power to the water heater (in the case of an electric heater) or the pilot light has gone out (if you have a gas unit).
FIX: Adjust your thermostat as necessary. If that doesn’t do the trick, check the power supply. Another possibility is the replacement of a damaged thermocouple in gas water heaters.
Leaking Water Heater
A leaking water heater (a sign may be low hot water pressure, or not enough hot water to shower) might be a reason to push the panic button… but first, take a few minutes to check where the leakage is coming from. Leaks near the top of the heater tend to indicate a problem with a valve, which won’t need a major repair. However, a leak from the water heater base is more serious.
FIX: You may need a qualified plumber to replace your drain valve or TPR (temperature pressure relief) valve. When your water heater is leaking from below, your plumber might be able to fix it if you call them soon enough. Otherwise, you will need to have a new water heater installed.
Noisy Water Heater
Sometimes your water heater might make some peculiar noises, loud enough to compete with your singing in the shower. Are these a cause for alarm? It depends on exactly what kind of sounds you are hearing. Sizzles and rumbles are both red flags, indicating a heavy sediment buildup in your hot water tank that might cause a breakdown in the near future. In addition, banging is a sign of a water hammer, which can lead to serious damage to your pipes.
FIX: To stop sizzling or rumbling, turn off the tank and have it flushed by a reliable plumbing company ASAP. Ask your plumber to install a water hammer arrestor to quiet down the banging and save the pipes.
Pilot Light Keeps Going Out
Many pilot lights go out once in a while, but when your water heater pilot light keeps going out continually, it’s a problem. And the chances are good that that problem stems from either a shortage of combustible air or a malfunctioning thermocouple.
FIX: Increase the air supply around your water heater by cleaning dust and lint off the appliance and clearing any clutter from the area around it. A bad thermocouple will require expert plumbing repair and is more than basic gas water heater troubleshooting.
Water Smells Bad
The water from your residential plumbing pipes should smell neutral. If it has a strong unpleasant odour, something’s wrong. To check whether your water heater is at fault, turn on a hot water faucet and let it run for a few minutes. And, yes, use your nose to determine exactly what you are smelling.
FIX: For a garlicky odour, relight the pilot light on your water tank. When you detect the scent of garbage, you’ll need a professional plumber to flush the hot water tank and possibly replace the anode rod. A strong smell of rotten eggs could signal a hazardous gas leak; turn off the gas supply if possible, get everyone out of your house, and make an emergency call to the gas company.
Water Looks Brown Or Rusted
The first thing to do is ask yourself, “Is the brown, rusty-looking water coming only from my hot water taps?” If the answer is yes, then most likely, either the anode rod or the water heater interior is starting to rust, especially if your hot water heater is nearing the end of its life expectancy. (A “no” answer means the issue does not originate from the hot water heater but rather from the water supply.)
FIX: Contact a plumber to inspect the water heater. If you catch the problem quickly enough, it might be fixable. Otherwise, you’ll need a water heater replacement. Consider installation of an efficient new tankless water heater.
https://www.huskyair.com/blog/hot-water-heater-isnt-working/
We hope you enjoyed our article about No Hot Water — Water Heater Repair. Thanks a lot for taking the time to read through our blog. Appreciated our piece of writing? Please share it. Let another person locate it. I enjoy reading our article about Hot Water Heater Repair.
Maintenance Sign-Up Report this page